High-tech pleasure meets intuitive design with our vibrating silicone Kore™ c-ring. Complete with a powerful vibrating motor, seven vibrational modes and three intensity levels. Try out the remote control for spontaneous couples’ play.
- Designed to comfortably restrict for harder and longer erections while providing clitoral and shaft stimulation
- One powerful motor at top of ring
- Remote control to maximize couples’ play
- Choose between seven high-performing vibration modes and three intensity levels
- One hour of continuous run time per charge
- Super soft silicone and ABS Plastic
- Used by men and couples
- Waterproof and washable safe with a rechargeable USB cord
Take the most of your Remote Control Penis Ring:
- USB charging
- Lithium Battery
- Length: 2.9 in. (7.3 cm)
- Width: 2.2 in. (5.7 cm)
- Depth: 1.1 in. (2.8 cm)
- Ring Inner Diameter: 1.3 in. (3.2 cm)
- Diameter: 1.5 in. (3.9 cm)
- Depth: 0.5 in. (1.2 cm)
- Run Time: 60 Minutes
- Charge Time: 120 Minutes
- Run Time: Up to 10 Hours
- Charge Time: 120 Minutes
Power / Standby Mode
To place the vibrating c-ring into standby mode, press and hold the power button on the c-ring for 3 seconds. The LED will light up and stay solid. You may now use the vibration buttons on the c-ring or the remote. To turn off standby mode, press and hold the power button on the c-ring for 3 seconds.
Once in standby mode - Press the vibration button on the c-ring or remote to turn on the vibrating motor. The LED on the c-ring will light up, the motor will start, and the LED will turn off after 2 seconds. Each press of the button will cycle through the ten modes of vibration and the LED on the c-ring will change in sync with each mode and then turn off after 2 seconds. (The LED on the remote will flash with each press). Press and hold the button on the c-ring or remote for three seconds to turn off.
To stop all functionality, press and hold the power button on the c-ring or remote for 3 seconds. Please note, standby mode can only be turned off via the power button on the c-ring. Caution - To prevent the battery from draining, always turn off standby mode after use (by pressing and holding the power button on the c-ring for 3 seconds. The LED will be off in standby mode).
Spray Jimmyjane Antibacterial Cleaner on the massager before use. Wipe with a clean, dry cloth and let it air dry. Repeat after use and store in a cool, dry place.
This massager is for novelty purposes only, is not intended for therapeutic purposes and is recommended for external use only. Prolonged use for more than 30 minutes or frequent use of more than twice daily is not advised or recommended. This massager is intended for adult use only. Use water-based lubricants only.