Specifications & More Details - Pulsus™ P-Spot
Size
- Length: 5.7 in. (14.4 cm)
- Width: 3.9 in. (10 cm)
- Insertable Length: 4.3 in. (11 cm)
- Insertable Diameter: 1.4 in. (3.6 cm)
- Weight: 8.3 oz. (234 g) (with remote)
- Remote Length: 2.1 in. (5.4 cm)
- Remote Width: 1.5 in. (3.9 cm)
- Remote Depth: 0.5 in. (1.3 cm)
Material
- Silicone & ABS Plastic
Charging Travel Lock On/Off:
Your Massager will be shipped with travel lock active.
To Lock - Press and hold the power button and top button on the massager (closest to the JimmyJane logo) at the same time for 3 seconds. The motor will buzz ONCE and the LED will blink ONCE at the same time. The massager is now locked.
To Unlock - Press and hold the power button and top button on the massager (closest to the JimmyJane logo) at the same time for 3 seconds. The motor will buzz TWICE and the LED will blink TWICE at the same time. The massager is now unlocked.
Charging
Massager
- Charge Time: 120 mins
- Run Time: 45 mins
Remote
- Charge Time: 120 mins
- Run Time: 10 hours
Use
POWER / STANDBY MODE
To enter standby mode, press and hold the power button on the massager for 3 seconds. A dim LED will turn on and stay solid and you may now use the buttons on either the massager or the remote. To turn off standby mode, press and hold the power button on the massager for 3 seconds.
COME HITHER MOTION
Once in standby mode - Press the power button on either the massager or the remote to cycle through the 10 modes of come hither motions. Press and hold the button for three seconds to turn off. Please note the remote will turn off all functionality, but the massager will remain in standby mode.
P-SPOT VIBRATION
Once in standby mode - Press the vibration button on the remote or massager to turn on the G-spot motor. The LED will light up and the massager will start. Each press will cycle through the three speeds & seven modes of vibration and the LED will change in sync with each mode. Press and hold the button for three seconds to turn off.
HYPER-PULSE
Once in standby mode - Press hyper-pulse button on the massager or remote to turn on the hyper-pulse motor. The LED will light up and the pulsations will start. Each press will cycle through the ten functions of pulsation and the LED will change in sync with each mode. Press and hold the button for three seconds to turn off.
POWER OFF
To stop all functionality, press and hold the power button on the massager or remote for 3 seconds. Please note, standby mode can only be turned off via the power button on the vmassager Caution - To prevent the battery from draining, always turn off standby mode after use (by pressing and holding the power button on the massager for 3 seconds. The LED will be off in standby mode).
Cleaning
Spray Jimmyjane Antibacterial Cleaner on the massager before use. Wipe with a clean, dry cloth and let it air dry. Repeat after use and store in a cool, dry place.
Warnings
This massager is for novelty purposes only, is not intended for therapeutic purposes and is recommended for external use only. Prolonged use for more than 30 minutes or frequent use of more than twice daily is not advised or recommended. This massager is intended for adult use only. Use water-based lubricants only.